Available on two different kits, each kit can make 1000 nails:
Step 1: Apply a very thin coat of Foil Primer on nail, let it dry until clear (approx. 2 minutes). Use light or fan to speed up drying process.
Step 2: Plate the foil on the tacky nail area, rub foil firmly against the nail and then pull foil strip off.
Step 3: Apply the Foil Sealer coat for shine and seal. To removes use nail polish remover.
Note: After applied Foil Sealer (Top Coat) The foil design will look
antique (wrinkle).
Click here To See Video
|
Kit contains: 8
Foil strip size 1.9" (4.8 Cm) x 48" (1.2 meter), 1 Foil
Primer/Adhesive and 1 Foil Sealer/Top coat. |
|
|
1 -
Sparkle Silver 1 - Gold 1 - Green 1 - Orange 1 - Purple |
1 - Splash Silver 1 - Rainbow Silver 1 - O' Silver Ring 1 - Foil Primer/Adhesive 0.5oz. (15ml) 1 - Foil Sealer/Top Coat 0.5oz. (15ml) |
|
Kit contains: 8
Foil strip size 1.9" (4.8 Cm) x 48" (1.2 meter), 1 Foil
Primer/Adhesive and 1 Foil Sealer/Top coat. |
|
|
1 - Red 1 - Silver 1 - Blue 1 - Magenta 1 - Mosaic |
1 - Gold Dust 1 - Silver Laser 1 - Silver Dust 1 - Foil Primer/Adhesive 0.5oz. (15ml) 1 - Foil Sealer/Top Coat 0.5oz. (15 ml) |
Red
Silver
Blue
Magenta
Mosaic
Gold Dust
Star Field
Silver Dust
Mystic Haze
Dancing Light
Gold
Green
Orange
Purple
Splash Silver
Confetti Silver
Rainbow Silver
vibrant Yellow
Ocean Waves
Silver Laser
Glass Menagerie
Circle Sanding
Crop Circles
Gold Florentine
Copper
Silver Pattern
O' Silver ring
Foil Primer/Adhesive
This pressure-sensitive glue.
Apply a very thin coat of Foil Primer on nail, let it dry until clear (approx. 2 minutes). Use light or fan to speed up drying process.
To clean work surface, use a
damp cloth if glue is wet. Use rubbing alcohol if glue is dry.
Foil Sealer/Top Coat
Apply the Foil Sealer coat for shine and seal.
To removes use nail polish remover.
Please note: After applied Foil Sealer (Top Coat) The foil design will look antique (wrinkle).