Available on two different kits, each kit can make 100 to 200 designs depending how big of the design.:
Step 1 - Thoroughly clean skin area with isopropyl alcohol.
Step 2 - Freehand design or use self adhesive pre-designed stencils from the kit. Apply a very thin coat of Foil Primer to the skin, let it dry until clear (approx. 2 minutes). Use fan to speed up drying process. -Plate the foil on the tacky skin area, rub foil firmly against the skin and then pull foil strip off.
Step 3 - Sprinkle a dash of baby powder to set the design on the skin. Lightly tap to loosen and get powder off the skin.
(foil size 1 7/8"x 48")
|
Kit contains: |
|
|
1 -
Sparkle Silver 1 - Gold 1 - Green 1 - Orange 1 - Purple 1 - Splash Silver |
1 - Rainbow Silver 1 - O' Silver Ring 1 - Foil Primer 0.5oz. 1 - Body Foil Remover 0.5oz. 1 - Reusable Plastic Stencil 6 - Rubbing Pad. |
Glow With Foil Kit #2
(foil size 1 7/8"x 48")
|
Kit contains: |
|
|
1 - Red 1 - Silver 1 - Blue 1 - Magenta 1 - Mosaic 1 - Gold Dust |
1 - Star Field 1 - Silver Dust 1 - Foil Primer 0.5oz. 1 - Body Foil Remover 0.5oz. 1 - Reusable Plastic Stencil 6 - Rubbing Pad. |
Sparkle Silver
Red
Silver
Blue
Magenta
Mosaic
Gold Dust
Star Field
Silver Dust
Mystic Haze
Dancing Light
Gold
Green
Orange
Purple
Splash Silver
Confetti Silver
Rainbow Silver
O' Silver Ring
vibrant Yellow
Ocean Waves
Silver Laser
Glass Menagerie
Circle Sanding
Crop Circles
Gold Florentine
Copper
Silver Pattern
Foil Primer
This pressure-sensitive glue.
Apply a very thin coat of Foil Primer on nail, let it dry until clear (approx. 2 minutes). Use light or fan to speed up drying process.
To clean work surface, use a
damp cloth if glue is wet. Use rubbing alcohol if glue is dry.
Foil Top Coat (Sealer)
Apply the Foil Sealer coat for shine and seal.
To removes use nail polish remover.